Epson R310 Bedienerhandbuch PDF herunterladen (Seite 10)

5) Tube set up – R series printer

a) Place the tube clip onto the front of the printer. It should be placed so that the

back of the clip is slotted into the groove left by the CD printing tray.

b) Run the tubing along the inside of the printer as shown below. Remove the

backing to the tape on the second clip and place it as picture.

Tube set up – RX series printers only

Remove the backing from the black attachment clip. Place the clip in the centre

of the printer as shown. Please ensure not to twist the tubing when connecting.

Attach the 2

tubing clip to hold the silicone tubing on the external right hand

side of the printer.

Note: Do not let the scanner lid crush the silicone tubing. Please check this

prior to operating the system

*Please be careful not to twist the

tubing before connecting it to the

printer.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Epson R310 Bedienerhandbuch Seite 10