Epson C31C391A8770 - TM U230P Two-color Dot-matrix Printer Bedienungsanleitung PDF herunterladen (Seite 5)

Version 2.61 Feb. 2008

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-U230)

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the

TM-U230 printers.

2.1 References of Firmware Versions

Refer to the release notes (Relnote.txt).

2.2 Settings of DIP Switches

Confirm that the following settings have been made correctly.

1) Serial port

DIP-SW1 DIP-SW2

No. Setting No. Setting

1 OFF Recommended 1 OFF Fixed at OFF

2 OFF Recommended 2 ON Fixed at ON

3 OFF Fixed at OFF 3 OFF Fixed at OFF

4 OFF Fixed at OFF 4 OFF Fixed at OFF

5 OFF Settable 5 ON Settable

6 OFF Settable 6 OFF Fixed at OFF

7 OFF Settable 7 OFF Fixed at OFF

8 OFF Settable 8 OFF Settable

It is possible to change the settings of DIP-SW1-1 and 2, but it is recommended

to leave them OFF.

Set DIP-SW1-3 (Handshake) to DTR/DSR.

Set DIP-SW1-4 (Bit length) to 8 bits.

Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.

The described set values are the default values. For the details, refer to the

product manual of the POSPrinter. Also, if these settings are changed, make

sure to change the port information using the SetupPOS utility.

Set DIP-SW2-5 (PAPER OUT LED blinking pattern) and DIP-SW2-8 (Internal

buzzer) to match the environment of use.

Make other settings in accordance with the settings described above.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Keine Kommentare

Epson C31C391A8770 - TM U230P Two-color Dot-matrix Printer Bedienungsanleitung Seite 5