Epson 2190 - FX B/W Dot-matrix Printer Betriebsanweisung PDF herunterladen (Seite 31)

Paper Handling 31

Using the Micro Adjust Function

The Micro Adjust function allows you to move the paper forward or

backward in 1/216-inch (0.118 mm) increments to adjust the tear-off and

top-of-form positions.

Adjusting the tear-off position

If your paper’s perforation is not aligned with the tear-off edge, you can

use the Micro Adjust function to move the perforation to the tear-off

position, as described below. Your tear-off position setting remains in

effect until you change it, even if you turn off the printer.

Caution:

Never use the knob to adjust the tear-off position; this may damage the

printer or cause it to lose the tear-off position.

1. You may need to press

the

Tear Off/Bin button to

advance the paper to the

tear-off position. Make

sure the Tear Off/Bin

light is flashing (the paper

is at the current tear-off

position).

2. Hold down the

Pause

button for about three

seconds. The Pause light

begins flashing and the

printer enters the Micro Adjust mode.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Keine Kommentare

Epson 2190 - FX B/W Dot-matrix Printer Betriebsanweisung Seite 31