Epson ActionPC 3000 Bedienungsanleitung PDF herunterladen (Seite 83)

Attaching Mounting Fames to the Drive

If you are installing a 3½-inch wide drive, you need to attach

mounting frames to the drive. If you are installing a drive that

already has mounting frames on it, see if it also has a plastic

guiderail and metal grounding plate attached to it. If so, follow

step 1 on page 4-5 to remove the guiderail and grounding plate.

Then go to “Installing the Drive” on page 4-17.

Follow these steps to attach mounting frames to a drive:

Locate the two mounting frames and four screws that came

with the drive.

As shown below, place a mounting frame on one side of the

drive and align it so that the oval holes in the frame are

positioned over the holes in the drive. Then secure the

mounting frame to the drive with the two screws.

mounting frame

Repeat step 2 to attach a mounting frame to the other side of

the drive.

4-16 Installing and Removing Drives

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 130 131

Keine Kommentare

Epson ActionPC 3000 Bedienungsanleitung Seite 83