Epson SR-600 Bedienungsanleitung PDF herunterladen (Seite 67)

Rev.A BIOS Setup 3-23

Developer's Guide SR-600

Confidential

Changing/Deleting the Password for the Drawer Kick Out Test

Follow the procedures below to change or delete the password for the drawer kick out test.

1. Select “Drawer Password” from the pull down Setup menu. You are asked to enter the

password.

2. Enter the current password and press Enter key.

3. Message “New” appears.

4. Press Enter key only to delete the password. Enter new password and press Enter key to

set a new password.

5. Message “Re-Enter” appears. Enter the password again and press the Enter key to

change or delete the password.

Setting Drawer ON time

Drawer ON time option sets the length of time for the voltage signal supplied to the cash drawer

solenoid to open.

3-3 Enter Drawer On Time screen

Select Drawer ON time option from the Setup pull down menu to set the time. The dialog box

appears. Set the length of the voltage signal required by the cash drawer in ms unit. The On

time can be set at any value within a range of 0 to 500 ms. The setting is rounded to the

minimum units that can be set by the TM that you are connected to. For the TM-930, the

minimum units are 10 ms, and for other TMs, the minimum units are 2 ms.

Please refer to the cash drawer’s manual for the appropriate value to enter.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 191 192

Keine Kommentare

Epson SR-600 Bedienungsanleitung Seite 67