Epson PowerLite S1 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 10)

EPSON PowerLite S1 Projector

5/03 EPSON PowerLite S1 Projector - 9

Projector Status Lights

If your projector isn’t working correctly, first turn it off, wait for

it to cool, and unplug it. Then plug the power cord back in and

turn on the projector. If this doesn’t solve the problem, check

the lights on top of the projector. They alert you to problems

with projector operations.

Using the Remote Control

The remote control uses a line-of-sight infrared signal. It lets

you access the projector’s features from anywhere in the room—

up to 20 feet away. (This distance may be shorter if the remote

control batteries are low.)

The projector may not respond to remote control commands in

these conditions:

❏ You are too far away—not within 20 feet (6 meters)—or not

within 30° to the left or right of the front or rear sensor or

15° above or below it

❏ The battery is weak or not installed correctly

❏ Ambient light is too bright

❏ A fluorescent light is shining into the infrared receiver

❏ A strong light source (such as direct sunlight) shines into the

infrared receiver

❏ Other equipment emitting infrared energy is present (such as

a radiant room heater)

Light Status Description and action

off The projector is unplugged. If you want to turn

it on, make sure the power cable is connected

securely at both ends, then press the

Power button to turn on the projector.

orange The projector is in sleep (or standby) mode.

You can unplug it to turn it off or press the

Power button to turn it on.

flashing

green

The projector is warming up. Warming up

takes about 35 seconds (the EPSON logo

appears after approximately 6 seconds).

When warming up is complete, the indicator

changes to steady green.

green The projector is operating normally.

flashing

orange

The projector lamp is off and the projector is

cooling down. Wait until the light stops

flashing. (The cool-down period lasts about 20

seconds.) Then, if you want to turn it off,

unplug it. If you want to turn it on, press the

Power button. (You can’t turn the projector

on, and you should never unplug it, when the

light is flashing orange.)

red The projector is too hot and the lamp has

turned off. Wait 5 minutes, then unplug it and

make sure nothing is blocking the projector’s

air filter. If it continues to overheat, clean the

air filter; see page 11 for instructions.

flashing red

at 0.5-

second

intervals

The lamp cover is not closed securely or the

lamp is broken or has burned out. Secure the

lamp cover or replace the lamp; see page 12

for instructions.

flashing

orange

The projector lamp has turned off

automatically because the projector has

overheated. Let it cool for a few minutes, then

turn it back on. Make sure nothing is blocking

the air filter. If it continues to overheat, clean

the air filter; see page 11 for instructions.

flashing red

at 1-second

intervals

There is an internal problem with the

projector. Unplug it from the electrical outlet

and contact EPSON for help.

Power light

Error light

Selects

computer or

component

video source

Selects S-Video

or Video source

Turns projector

on or off

Cycles through

5 color modes:

Dynamic,

Presentation,

Theatre, Living

Room, sRGB

Turns off the

audio and

video; press

it again to

resume

E-Zoom

z zooms

in on (enlarges)

the selected area

of the image

E-Zoom

reduces the

zoomed part

of the image

When a menu is displayed, the

buttons select

menu items and settings; when

using the E-Zoom function, these

buttons move the scope around

the screen and scroll the image

Cancels the

current function

or displays the

previous menu

or screen when

using the

projector menus

Automatically

adjusts computer

images to their

optimum settings

when Auto Setup

has been turned

off in the Video

Selects a

highlighted

menu option

or displays the

next screen or

Freezes the

current video

or computer

image on the

screen

Changes the

aspect ratio of

images from

4:3 to 16:9

Displays or

hides the

projector menus

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson PowerLite S1 Anleitung zur Fehlerbehebung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Epson PowerLite S1