Epson PowerLite 5000 Betriebsanweisung PDF herunterladen (Seite 43)

To connect a video source to the projector:

Turn off the projector and video source if they are on.

If your video source uses a small, round, one-prong composite

(RCA) video connectors, you’ll need the audio/visual cable that

comes with the PowerLite 5000. If your video source uses a large,

round, four-prong S-video connector, you will need to purchase

an S-video cable.

For composite video, connect the yellow RCA plug on one end of

the audio/visual cable to the projector’s Video In jack. Connect

the other yellow RCA plug to the video-out jack of your video

source.

Connect the other plugs on the audio/visual cable to the Audio In

jacks of the projector: insert the white plug into the L Audio In

jack and the red plug into the R Audio In jack. Connect the plug

at the other end of the audio/visual cable to the audio output jacks

of the video source.

Connecting to a Computer

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 119 120

Keine Kommentare

Epson PowerLite 5000 Betriebsanweisung Seite 43