Epson EMP-TW20 Betriebsanweisung PDF herunterladen (Seite 19)

Adjusting the Projection Screen and the Audio Volume

Basic Operations

Adjusting the volume

Correcting keystone distortion

(Keystone)

TIP

Correcting keystone distortion

(Keystone)

When you wish to adjust the projection above or below the range of lens shift

adjustment set the projector at an angle.

When the projector is angled, the projected image may distort into a trapezoid. In such

cases, press ( ) ( ) on the control panel, or on the remote control

to adjust the images.

However, the image quality will decrease compared to if the lens shift function is used.

When the lens is shifted to the left or right, complete keystone correction is not

possible. When making keystone corrections set the lens at the centre left to right.

Adjusting the volume

The volume of the projector's built-in speaker can be adjusted as follows.

When the button is pressed to the side, the volume increases, and when it is pressed to

the side, the volume decreases.

Keystone distortion can be corrected within a maximum vertical angle of approximately 30˚.

You can also make adjustments from the configuration menu. p.28

To reset the correction value, press and hold down with pressed down for at

least 1 second on the control panel.

You can also make adjustments from the configuration menu. p.30

30˚

Remote control operation Control panel operation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Keine Kommentare

Epson EMP-TW20 Betriebsanweisung Seite 19