Epson 1880 Betriebsanweisung PDF herunterladen (Seite 47)

4. Select the Others menu and press Enter.

5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.

Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a

number from 0 to 255).

6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to

allow the projector to be detected.

7. If your network environment uses a Crestron RoomView controller, turn on the RoomView setting to

allow the projector to be detected.

8. If you are connecting to a network using Bonjour, turn on the Bonjour setting.

9. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Parent topic: Using the Projector on a Network

Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control

projection using a compatible web browser. This lets you access the projector remotely.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 187 188

Keine Kommentare

Epson 1880 Betriebsanweisung Seite 47