B813071 - Transparency UnitUsing the Transparency Unit...3-2Unpacking the transparency unit...3-2Removing the shipping screw...3-
Follow the steps below to position transparencies or slidesusing the transparency guide with two 10.25-inch-longopenings:4.5.Open the transparency uni
Scanning normal (reflective) documentsTo scan a normal reflective (paper) document when thetransparency unit is installed, always use the reflectivedo
3.Position the reflective document and close the transparencyunit.To remove the reflective document mat, slide it up and out ofthe slots on the transp
Using the Transparency UnitWhen installed on your scanner, the transparency unitprovides high-quality, full-color scanning of transparencies andslides
Removing the shipping screwTo prevent damage during shipping, a shipping screw isattached to the transparency unit. Follow the steps below toremove th
Note:Before transporting the scanner, you need to remove the transparencyunit and reattach its shipping screw. You can attach the shippingscrew only w
3.Locate the two screws at the back of the scanner and slidethe slots on the transparency unit forward underneaththese two screws.4.Insert the two scr
6.Connect the transparency unit’s cable to the optionconnector on the scanner. Then reconnect the scanner’spower cable.Storing the transparency guides
-ransparency guidesI-LPositioning transparencies and slidesYou can scan transparencies or slides of various sizes using thetransparency guides. Select
If your transparency is larger than the sizes in the table above,you can place it directly on the scanner’s document tablewithout using a transparency
2.Hold up the clear plastic flap and insert the transparency orslide in the transparency guide, as shown below.3.Place the transparency guide containi
Kommentare zu diesen Handbüchern