Epson Artisan 700 Installationsanleitung PDF herunterladen (Seite 32)

32 Troubleshooting

11. Click OK.

12. Click

OK again to close the EPSON Scan Settings window.

Note:

If the printer’s IP address changes, you will need to repeat steps 1 through 12

to reconfigure Epson Scan network settings.

You’re ready to scan and print. See your printed documentation and on-screen

Epson Information Center for details.

Troubleshooting

If you have problems setting up or using your product on a network, check these

sections for help:

■ “Setup Problems” below

■ “Printing Problems” on page 34

■ “Scanning Problems” on page 35

This section also explains how to print a Network Status Sheet (see page 36) and

reset network settings (page 37).

Setup Problems

Software installation failed

Reset the printer’s network settings (see page 37) and perform a first time

installation of the printer software. (See page 3 for wireless installations or page 15

for wired installations.)

Cannot connect to or find the wireless router or access point

■ Try connecting to the wireless router or access point with your computer or

another device to confirm that it is working correctly.

■ Make sure that the printer is within range of your wireless router or access

point.

■ Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or

large metal object such as a filing cabinet.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Epson Artisan 700 Installationsanleitung Seite 32