Epson DFX-900 Bedienungsanleitung PDF herunterladen (Seite 10)

10 Loading Paper On the Front Tractor

3. Position the left sprocket so the pins are to the left of the arrow mark on the

scale. Push up the sprocket lock lever to lock it in place.

4. Slide the right sprocket to match the width of your paper. (Do not lock it in

place yet.)

5. Center the two paper supports between the two sprockets.

Note:

For paper less than four inches wide, remove the paper supports by pulling them

off the tractor.

6. Open both sprocket covers.

7. Be sure your paper has a clean, straight edge and that the printable side of

the paper is facing up. Fit the first few holes over the sprocket pins and close

the sprocket covers.

8. Slide the right sprocket until the paper is straight and there is no slack. Lock

the sprocket by pushing up the sprocket lock lever. (The right sprocket may

move slightly.)

Note:

Be careful not to pull the paper too tightly.

arrow mark

paper supports

sprocket cover

sprocket lock lever

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

Epson DFX-900 Bedienungsanleitung Seite 10