LCM20 & LCM25 Operator’s Manual Printek, Inc. 1517 Townline Road Benton Harbor, MI 49022 800-368-4636 www.printekmobile.com
PAPER Pressing the paper feed button when the printer is idle advances paper at typically two inches per second, depending on the battery voltage. H
STATUS INDICATIONS The Status Indicator at the front of the printer has a number of color combinations, which repeat in up to a 4-phase pattern to p
PRINTER OPERATION AND PROGRAMMING The LCM20 and LCM25 printers utilize a Fujitsu FTP-628MCL103 printer mechanism, with a fixed (parallel) print head
INTERFACE DETAILS RS-232 SERIAL INTERFACE (APPLIES TO ALL MODELS) All LCM20 and LCM25 printers have an industry standard RS-232 interface. The defa
There is no facility to wake the printer over the Bluetooth link. The printer must be awake before a Bluetooth link may be established and any data c
CONNECTIONS AND EMC PRECAUTIONS CONNECTOR DETAILS The printer has two user connectors shown below: Pin 1 RJ12 Combined Data SocketCharger Input
The connections to a standard PC COM port are as follows: DB-9 Pin Name Description (refers to PC) RJ12 Pin 3 TxD Serial Data Output 3 2 RxD
WALL AND BELT MOUNTING INSTRUCTIONS A combined bracket/clip suitable for attaching the printer to a wall or belt is available The bracket snaps int
GETTING STARTED You may find that you can connect the printer to your Personal Computer (PC), and everything works perfectly the first time. However
WINDOWS™ PRINTER DRIVERS A Windows driver specifically written for the printer is available and can be downloaded from www.printek.com. It may be ne
Table Of Contents Introduction ...
INTRODUCTION This document is an Operator’s Manual, written for the person connecting and using the PrintekMobile LCM20 and LCM25 thermal printers.
MODES OF OPERATION The printer has three operating modes when not actually printing: "Idle Mode": ready to accept data, but no data are
SPOOLING MODE In spooling mode, data are received and stored, but not printed. This is useful when printing needs to be suppressed during data tran
BATTERY PACKS OVERVIEW OF BATTERY OPERATION The printer is normally supplied with a standard 1.8Ah NiMH battery pack. The primary power for the pr
BATTERY PACK HANDLING PRECAUTIONS WARNING! Battery Handling Precautions The battery pack contains an internal safety fuse, but the user must take
Kommentare zu diesen Handbüchern