Epson POWERLITE 8350 Bedienungsanleitung PDF herunterladen (Seite 16)

16 Setting Up the Projector

Installing the Projector

To install the projector, you first need to determine the location, based on the size of your

screen (maximum diagonal image size). Use the tables on page 14 as a guide to positioning the

projector.

To suspend the projector from a ceiling, you will need the optional projector mount designed

for the projector. See page 10 for ordering information. Follow the instructions included with

the mount to install the projector.

WARNING: When installing or adjusting the ceiling mount, do not use adhesives to prevent the

screws from loosening and do not use any type of oil or lubricant. These may cause the projector

casing to crack and the projector may fall, causing serious injury and serious damage to the

projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears

right side up. Follow these steps:

1. Press the

Menu button on the remote control.

2. Open the

Settings menu, then select Projection.

3. Select

Front/Ceiling.

4. Press the

Menu button when done.

Note that you can rotate the Epson logo plate

180 degrees when suspending the projector from a

ceiling.

If you are planning to use an AV controller with the

projector, refer to the table of ESC/VP21 command

codes on page 69. In addition, the projector’s

Trigger

out

port can be used to lower a projection screen or

operate a motorized anamorphic lens (see page 48).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Keine Kommentare

Epson POWERLITE 8350 Bedienungsanleitung Seite 16