Epson LX-810 Bedienungsanleitung PDF herunterladen (Seite 189)

Power Supply

Problem

Solution

Power is not being

supplied.

The POWER light

does not go on.

The

POWER light

comes on briefly and

then goes off. The

light stays off even

when the power is

switched on again.

The power cable may be loose or not

properly plugged into the electrical outlet.

Turn off the printer and check the power

cable connections between the printer and

the electrical outlet.

The power switch is off. Turn on the

switch.

Power is not being supplied to the

electrical outlet. Check to see if the

electrical outlet is controlled by an outside

switch or automatic timer; if so, use a

different outlet. Plug another electrical

device into the outlet to determine

whether the outlet is working properly.

The voltage may not be correct for your

printer. Check the label on the printer’s

rear panel and confirm that the printer’s

voltage rating matches the voltage of your

electrical outlet. If the voltages do not

match, unplug the printer and contact your

Epson dealer immediately. Do not

reconnect the power cable to an electrical

outlet. Refer to 1-15.

The problem may lie with the electrical

outlet. Plug another electrical device into

the outlet to determine whether the outlet

is operating properly.

Troubleshooting 7-3

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 295 296

Keine Kommentare

Epson LX-810 Bedienungsanleitung Seite 189