Epson PowerLite Pro Cinema 800 Betriebsanweisung PDF herunterladen (Seite 39)

Making Detailed Adjustments 39

Color Settings

If the image colors don’t look correct, you can adjust them using these settings. Use the first

three settings described below to make the most visible changes. If you only need to make

slight adjustments, you can fine-tune the picture with the remaining settings. Most color

settings are stored separately for each image source and color mode.

Note: If you’re using a commercially available color calibration DVD, you can display a color-bar

test pattern and then filter colors in the image by pressing the Pattern button. Select one of the

Color Isolation options for the color you want to filter (R/G/B). This lets you adjust color settings

without holding a filter over your eyes while making adjustments. Press the Esc button when

you’re done.

■ Color Saturation

Note: This setting cannot be used when the Color Mode is set to x.v. Color (see page 29) or

with a signal input through the PC port.

Adjusts the color intensity of the image.

■ Tint

Note: This setting cannot be used when the Color Mode is set to x.v. Color (see page 29) or

with a signal input through the PC port.

Shifts the color balance between magenta and green.

■ Abs. Color Temp.

Note: This setting cannot be used when the Color Mode is set to x.v. Color (see page 29).

Shifts the color balance between red and blue, making the image appear warmer or

cooler.

■ Skin Tone

Note: This setting cannot be used when the Color Mode is set to x.v. Color (see page 29).

Makes fine adjustments to the tint and controls the amount of magenta or green in the

image. Also useful for correcting black-and-white images, if they look tinted.

Image > Color Saturation

Image > Tint

Image > Abs. Color Temp.

Image > Skin Tone

Downloaded From projector-manual.com Epson Manuals

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 77 78

Keine Kommentare

Epson PowerLite Pro Cinema 800 Betriebsanweisung Seite 39